The P601 is a 3.5 gallon white pail. This is a CLOSEOUT item that is new but very dusty from warehouse storage. The pail is made of high density polyethylene (HDPE), a highly durable material that is able to withstand relatively higher temperatures. The pail includes a metal bail with a plastic handle making the pail easier to carry. This bucket is ideal for food storage and many other applications. This pail also includes a lid with a non-vented spout, although we are not recommending that the spout be used due to a cracking flaw. This lid is made of high density polyethylene (HDPE). The included gasket will make a tight seal and the tear tab will create a tamper-evident seal. The lid cannot be removed until the tab is torn off. The P601 is made in the USA. The manufacturer of this item is Letica. It is a surplus item. No technical data is available.
|Food Contact Acceptable|
|Size||3 1/2 gallons|
|Diameter||12 in / 30.480 cm|
|Height||11.75 in / 29.845 cm|
This information has been provided as a general guide. Please remember, it is your responsibility to test your product's compatibility with CPS packaging.
High density polyethylene, or HDPE for short, is one of the most pervasive plastic types. It has an excellent resistance to chemicals, making it the go-to plastic for ...
PET is marked with the resin code of 1. PET is everywhere and in the textile industry is known as ... polyester. PET is safe for food contact products and you'll be ...
LDPE is marked with the resin identification code of 4. LDPE is flexible, tough, and almost unbreakable. It's perfect for products that need a good squeeze like ...
Orders for less than $50 of product (not including freight) will be subject to a $10 small order fee. Please review our small order fee.
All the items we sell have never been used, however, order in full case quantities to reduce dust, dirt, and scuffing.
We purchase from multiple manufacturers, so some items may have minor variation in color or shape. Avoid this by ordering in full case quantities.
Please remember, you are responsible for testing your product with packaging for compatibility.
Not in service